XPLORE V2

All-Round / Freeride

XPLORE V2

All-Round / Freeride

Kite Type – The Xplore is a 3-strut delta kite. This freeride kite is designed to make your life easy. Easy jumping, easy upwind, easy relaunch, the kite requires minimal rider input to perform.

Rider Level –  Very suitable for beginners, intermediate & advanced riders.

Rider styles – Freeride, Learning & Progressing. 

Sizes – 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 15

BUY

Kite Type – The Xplore is a 3-strut delta kite. This freeride kite is designed to make your life easy. Easy jumping, easy upwind, easy relaunch, the kite requires minimal rider input to perform.

Rider Level –  Very suitable for beginners, intermediate & advanced riders.

Rider styles – Freeride, Learning & Progressing. 

Sizes – 5 / 6 / 7 / 8 / 9 / 10 / 11 / 12 / 15

BUY

FOOTAGE

FOOTAGE

FEATURES

XPLORE V2

  • 54 g/m2.
  • Supplied by Techfiber, Japan.
  • Designed & manufactured in Japan.
  • The double sided coating results in longer lasting performance.
  • Manufactured with Toray High Tenacity Polyester Yarn.
  • Contains a PFOA free water repellency layer.
  • The canopy is cut by laser for unmatched precission.

XPLORE V2

  • The dacron frame (red) provides extra rigidity and abbresion resistance.
  • The double canopy fusion layer (gray) provides an intermediate layer between the light canopy and heavy dacron decreasing high stress area’s.
  • The battens and damping piramids on the trailing edge (both black) prevent vibrations upon heavy use increasing the materials lifetime. 

XPLORE V2

  • The scuff guards provide the optimal wear resistance on the most exposed areas of the kite.

 

XPLORE V2

  • Connect your pump without adapters.
  • Provides an optimum airflow in combination with our Max Flow Single Pump System.
  • Can be used as deflate, although we recomment using the Wing Tip Storm Deflate.

XPLORE V2

  • Inflate the kite in one shot by just using the Direct Connect Inflate.
  • Less effort on inflating due to large diameter valves and tubes.
  • Fast deflate when packaging.

XPLORE V2

  • Allows packing the kite in one go.
  • Avoids frontal sand blasts during packing.
  • Keeps the “Direct Connect Inflate” free of sand.

XPLORE V2

  • The pulley on the main front bridle provides extra depower.
  • Gusts are better absorbed making your ride more comfortable.
  • The dyneema bridle line over which the pulley runs has an extra line spliced inside to maintain a rounder shape reducing wear.
  • The spliced in line is long enough to allow the bridle line to be turned around multiplying its lifetime.  
  • The pulley is made of Nylon 6 with micro teflon capsules for reduced friction.

XPLORE V2

The Xplore V2 has an integrated NFC tag which is programmed on the Booomtag platform.

  • WHAT ITS NOT ?
    • It is not a GPS tracker to find your stuff.
    • It is not a chip that collects data from you to sell to third parties.
    • It is not an electronic device that contains a battery.
  • WHAT IS IT THEN?
    • A NFC tag can be read with any modern smartphone.
    • Each tag has a unique identifier just like a serial number on the products.
    • In this case the tag is programmed for the Booomtag platform.
    • After scanning the tag you will see information regarding the product like, name, version plus, if you want, user defined information.
    • You can register your product for free on the Booomtag platform under your free account with all your other products that have the tag.
    • You first get privacy settings which you can adjust at any time.
  • WHAT DOES IT DO FOR YOU?
    • If your Ventum product gets stolen or lost, you can indicate this in your account. As of then the tag will not show the standard information but a clear message that the product is reported as lost with the action buttons you choose (call, sms, mail).
    • Others cannot get your name, number, or address by reading the tag. There are situations and professions where that may be preferred.
    • You can show ICE (in case or emergency) numbers when someone reads the tag.
    • You can show important medical information when someone reads the tag.
    • You can receive information regarding recalls or other safety information.
    • If you give permission, you will receive information about upcoming upgrades, replacement offers and maintenance advice.
  • WHAT DOES IT DO FOR VENTUM?
    • The tag gives each product a unique identification number which helps to identify affected products in case of manufacturing defects.
    • The tag allows us to stay in touch! Ventum does not send general newsletters by mail but with your Booomtag account you can register to receive information and offers related to your products and situation.

XPLORE V2

 

  • The Xplore backline bridle has two settings marked by a blue and red label.
  • The blue setting provides lower bar pressure and faster turning.
  • The red setting provides  higher bar pressure and more feedback.

XPLORE V2

 

  • Frontline pigtails end with knots.
  • Backline pigtails end with loops.
  • Left side pigtails are red.
  • Right side pigtails are blue.

XPLORE V2

  • Line deflectors reduce the chance on line wraps.

XPLORE V2

  • 160 g/m2.
  • Supplied by Dimension Polyant, Germany.
  • Designed & manufactured in Germany.
  • The dacron is cut by laser for unmatched precision.

XPLORE V2

  • Thickness of 100µm.
  • Supplied by Covestro, Germany.
  • Made of a UV stabilized Ether based TPU.
  • The bladder seals are HF welded.
  • The bladder valves are HF welded using glue foils for consistant bonding and quality.
  • 5 – 2.2 kg
  • 7 – 2.7 kg
  • 9 – 3.1 kg
  • 11 – 3.6 kg
  • 13 – 3.9 kg

FEATURES

XPLORE V2

  • 54 g/m2.
  • Supplied by Techfiber, Japan.
  • Designed & manufactured in Japan.
  • The double sided coating results in longer lasting performance.
  • Manufactured with Toray High Tenacity Polyester Yarn.
  • Contains a PFOA free water repellency layer.
  • The canopy is cut by laser for unmatched precission.

XPLORE V2

  • The dacron frame (red) provides extra rigidity and abbresion resistance.
  • The double canopy fusion layer (gray) provides an intermediate layer between the light canopy and heavy dacron decreasing high stress area’s.
  • The battens and damping piramids on the trailing edge (both black) prevent vibrations upon heavy use increasing the materials lifetime. 

XPLORE V2

  • The scuff guards provide the optimal wear resistance on the most exposed areas of the kite.

 

XPLORE V2

  • Connect your pump without adapters.
  • Provides an optimum airflow in combination with our Max Flow Single Pump System.
  • Can be used as deflate, although we recomment using the Wing Tip Storm Deflate.

XPLORE V2

  • Inflate the kite in one shot by just using the Direct Connect Inflate.
  • Less effort on inflating due to large diameter valves and tubes.
  • Fast deflate when packaging.

XPLORE V2

  • Allows packing the kite in one go.
  • Avoids frontal sand blasts during packing.
  • Keeps the “Direct Connect Inflate” free of sand.

XPLORE V2

  • The pulley on the main front bridle provides extra depower.
  • Gusts are better absorbed making your ride more comfortable.
  • The dyneema bridle line over which the pulley runs has an extra line spliced inside to maintain a rounder shape reducing wear.
  • The spliced in line is long enough to allow the bridle line to be turned around multiplying its lifetime.  
  • The pulley is made of Nylon 6 with micro teflon capsules for reduced friction.

XPLORE V2

The Xplore V2 has an integrated NFC tag which is programmed on the Booomtag platform.

  • WHAT ITS NOT ?
    • It is not a GPS tracker to find your stuff.
    • It is not a chip that collects data from you to sell to third parties.
    • It is not an electronic device that contains a battery.
  • WHAT IS IT THEN?
    • A NFC tag can be read with any modern smartphone.
    • Each tag has a unique identifier just like a serial number on the products.
    • In this case the tag is programmed for the Booomtag platform.
    • After scanning the tag you will see information regarding the product like, name, version plus, if you want, user defined information.
    • You can register your product for free on the Booomtag platform under your free account with all your other products that have the tag.
    • You first get privacy settings which you can adjust at any time.
  • WHAT DOES IT DO FOR YOU?
    • If your Ventum product gets stolen or lost, you can indicate this in your account. As of then the tag will not show the standard information but a clear message that the product is reported as lost with the action buttons you choose (call, sms, mail).
    • Others cannot get your name, number, or address by reading the tag. There are situations and professions where that may be preferred.
    • You can show ICE (in case or emergency) numbers when someone reads the tag.
    • You can show important medical information when someone reads the tag.
    • You can receive information regarding recalls or other safety information.
    • If you give permission, you will receive information about upcoming upgrades, replacement offers and maintenance advice.
  • WHAT DOES IT DO FOR VENTUM?
    • The tag gives each product a unique identification number which helps to identify affected products in case of manufacturing defects.
    • The tag allows us to stay in touch! Ventum does not send general newsletters by mail but with your Booomtag account you can register to receive information and offers related to your products and situation.

XPLORE V2

 

  • The Xplore backline bridle has two settings marked by a blue and red label.
  • The blue setting provides lower bar pressure and faster turning.
  • The red setting provides  higher bar pressure and more feedback.

XPLORE V2

 

  • Frontline pigtails end with knots.
  • Backline pigtails end with loops.
  • Left side pigtails are red.
  • Right side pigtails are blue.

XPLORE V2

  • Line deflectors reduce the chance on line wraps.

XPLORE V2

  • 160 g/m2.
  • Supplied by Dimension Polyant, Germany.
  • Designed & manufactured in Germany.
  • The dacron is cut by laser for unmatched precision.

XPLORE V2

  • Thickness of 100µm.
  • Supplied by Covestro, Germany.
  • Made of a UV stabilized Ether based TPU.
  • The bladder seals are HF welded.
  • The bladder valves are HF welded using glue foils for consistant bonding and quality.
  • 5 – 2.2 kg
  • 7 – 2.7 kg
  • 9 – 3.1 kg
  • 11 – 3.6 kg
  • 13 – 3.9 kg

FREE WITH EACH KITE

BACKPACK

Pump attachment
Inside bar compartment
Frontside storage compartment

XPLORE V2

COMPRESSION BAG

Travel pouch
Compression straps
Light weight, low volume travel

XPLORE V2

MULTIPURPOSE BELT

Minimize volume of the folded kite
Clip board to the backpack
Cary board over shoulder

XPLORE V2

REPAIR SET

Self adhesive bladder
Self adhesive black and white dacron
Canopy and Dacron in kite colors

XPLORE V2

FREE WITH EACH KITE

BACKPACK

Pump attachment
Inside bar compartment
Frontside storage compartment

XPLORE V2

COMPRESSION BAG

Travel pouch
Compression straps
Light weight, low volume travel

XPLORE V2

MULTIPURPOSE BELT

Minimize volume of the folded kite
Clip board to the backpack
Cary board over shoulder

XPLORE V2

REPAIR SET

Self adhesive bladder
Self adhesive black and white dacron
Canopy and Dacron in kite colors

XPLORE V2

WINDRANGE

Windrange tables are indicative.
They vary based on skill level, currents, board type and size.

55 kg twintip rider

XPLORE V2

75 kg twintip rider

XPLORE V2

95 kg twintip rider

XPLORE V2

WINDRANGE

Windrange tables are indicative.
They vary based on skill level, currents, board type and size.

55 kg twintip rider

XPLORE V2

75 kg twintip rider

XPLORE V2

95 kg twintip rider

XPLORE V2